Imported electric explosion-proof control valve
Introduction to the electric explosion-proof control valve equipped with German imported or series electric explosion-proof actuators and other components. There is a servo amplifier in the electric actuator. There is no need to install a separate servo amplifier. It can control the operation with an input control signal or a single-phase power supply. It relies on the pressure and temperature of the medium flowing through the valve as an energy source to drive the valve to work automatically. No external power supply and Secondary instruments. This kind of self-operated regulating valve uses the feedback signal pressure difference temperature at the valve output end to be transmitted through the signal pipe to the actuator to drive the valve disc to change the opening of the valve to achieve the purpose of regulating pressure, flow and temperature.
Features The imported electric explosion-proof single-seat sleeve control valve has the characteristics of small size, light weight, simple wiring, large flow rate, and high adjustment accuracy. It is widely used in industrial process automatic control in electric power, petrochemical, metallurgy, environmental protection, light industry, teaching and scientific research equipment and other industries. in the system.
Imported electric explosion-proof regulating valve actuator
Output speed ~ rpm output torque ~ Newton meters rated torque error dead zone ~ adjustable output starting frequency times/hour under rated load input signal ~/, ~/, switching power supply, relative humidity, relative temperature ~ explosion-proof explosion-proof grade IIB protection grade input and output channels are all optically isolated.
Notes on the installation of imported electric explosion-proof control valves
The height of the installation position of the electric explosion-proof control valve and the inlet and outlet directions must comply with the design requirements for the port direction, and the connection should be firm and tight.
Various types of end and pipe connections are available. The connection methods include threaded flange and welded connection. When connecting flanges, if the temperature exceeds the limit, the bolt flange and gasket will creep and relax, so high-temperature resistant bolt materials should be selected.
Appearance inspection must be carried out before the valve is installed. For valves whose working pressure is greater than that of the main pipe and which have a cutting function on the main pipe, strength and tightness tests should be carried out, and they can only be used after passing the test.
During the strength test, the test pressure shall be times the nominal pressure and the duration shall not be less than that. The valve shell packing shall have no leakage.
During the tightness test, the test pressure, which is twice the nominal pressure, should remain unchanged for the duration of the test. The time should comply with the provisions of the table. The valve disc sealing surface is deemed to be qualified if there is no leakage.
Technical parameters of imported electric explosion-proof regulating valve
■ Valve body
Type straight-through single-seat cast ball valve
Nominal diameter
Nominal pressure
Flange standard etc.
Material: cast steel, cast stainless steel, etc.
Upper valve cover standard type ~ heat dissipation type ~ low temperature type ~ bellows seal type ~
Gland type bolt compression type
Packing type poly PTFE packing, impregnated PTFE asbestos packing, asbestos textile packing, graphite packing
■ Valve internal components
Valve core type single-seat plunger type valve core
Flow characteristics equal percentage characteristics and linear characteristics
Material Stainless steel r Stainless steel cladding Stellite alloy
Imported electric explosion-proof regulating valve | Imported explosion-proof regulating valve | Imported electric regulating valve